Surface Mount Room Panel

Flush mount thermostat with built in temperature sensor* and LCD display.

*The temperature may be sensed either through the wall panel’s built in temperature sensor OR through the return air sensor connected to the main board (DIP Switch selectable).

Easy To Use HVAC Analyzer

DOWNLOADS
	M400ED Owner’s Manual

Unique multi-sensing,easy to use Analyzer for a wide range of applications from simple temperature, humidity, air velocity and dew point to balancing complex multi-outlet systems.

• Temperature
• Humidity
• Air Velocity
• Air Volume (CFM)
• Dewpoint
• Energy Capacity = BTU/H

24VAC Surface Mount Thermostat With FanCycler® Applications

DOWNLOADS
	ERV-24 Datasheet
	ERV-24 Operating Manual
	ERV-24 Owner’s Manual
	Technician Settings/Advanced Features
	Quick Start Guide

The ERV-24 brings you the cutting edge in technology into an extremely simple 24Vac thermostat. FanCycler® methods are incorporated into the attractive, surface mounted thermostat which has a large, easy-to-read, display.

The ERV-24-HC11 thermostat with FanCycler® has enhanced features to compliment controlled mechanical ventilation systems. These features were configured by your installing technician. A brief summary description follows:

FAN CYCLING CONFIGURATION — The purpose of fan cycling is to assure that the central air handler fan will run enough to distribute ventilation air and evenly mix air throughout the house when there is no demand for heating or cooling. Rather than operate the fan continuously or by a simple timer that can’t consider prior operation, the FanCycler® method saves energy and wear and tear on equipment by only operating the fan if it hasn’t already operated enough.

VENTILATION DAMPER CYCLING — The purpose of cycling the ventilation damper is to limit the possibility of over-ventilating during peak-load conditions which could cause unnecessary space conditioning energy consumption. If the fan stays on longer than needed for the introduction of ventilation air, the damper will automatically close.

Features

• Main Supply 24Vac
• Fresh Air Damper output – 24Vac – Power Open / Spring close
• Remote sensor connection or Average option
• Offset for temperature reading adjustment
• Lock buttons (Tamper proof)
• Data Storage – Diagnostics
• FanCycler® build in

DIP Switch/Jumper selection

• Programmable or non Programmable
• Auto Change-Over or Manual Heat-Cool
• Compressor 3 minute delay
• Fan Mode (Electric or Oil/Gas)

Our thermostats are installed in many of the high end condominium buildings in the Battery Park area of lower Manhattan, including the FMT, ETN and CTR models.

Thermostats that we designed are presently in use in large hotels located in Las Vegas, Chicago, Houston, Niagara Falls, and New York City. Our Fan Cycler thermostats are in use with America’s major builders in California, Las Vegas and Florida.

Our building automation solutions include BACnet, TCP/IP, Modbus and Maxinet communication networks which can help you increase efficiency and control your heating and cooling costs.

We remain committed to providing high tech thermostat solutions for all our past and future clients.

External temperature sensors: